Allied Telesis AT-WR4500 - Manual (Page 138)

138 AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
RouterOS v3 Configuration and User Guide
Change of Authorization
RADIUS disconnect and Change of Authorization (according to RFC3576) are supported as well. These
attributes may be changed by a CoA request from the RADIUS server:
•
Mikrotik-Group
•
Mikrotik-Recv-Limit
•
Mikrotik-Xmit-Limit
• Mikrotik-Rate-Limit
•
Ascend-Data-Rate (only if Mikrotik-Rate-Limit is not present)
• Ascend-XMit-Rate (only if Mikrotik-Rate-Limit is not present)
•
Mikrotik-Mark-Id
•
Filter-Id
• Mikrotik-Advertise-Url
•
Mikrotik-Advertise-Interval
•
Session-Timeout
• Idle-Timeout
•
Port-Limit
It is not possible to change IP address, pool or routes that way - for such changes a user must be
disconnected first.
Attribute Numeric Values
Name VendorID Value RFC where it is defined
Acct-Authentic 45 RFC2866
Acct-Delay-Time 41 RFC2866
Acct-Input-Gigawords 52 RFC2869
Acct-Input-Octets 42 RFC2866
Acct-Input-Packets 47 RFC2866
Acct-Interim-Interval 85 RFC2869
Acct-Output-Gigawords 53 RFC2869
Acct-Output-Octets 43 RFC2866
Acct-Output-Packets 48 RFC2866
Acct-Session-Id 44 RFC2866
Acct-Session-Time 46 RFC2866
Acct-Status-Type 40 RFC2866
Acct-Terminate-Cause 49 RFC2866
Ascend-Client-Gateway 529 132
Ascend-Data-Rate 529 197
Ascend-Xmit-Rate 529 255