Allied Telesis AT-WR4500 User Manual
Page 135
AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
135
RouterOS v3 Configuration and User Guide
•
NAS-Port-Id - async PPP - serial port name; PPPoE - ethernet interface name on which server is
running; HotSpot - name of the physical HotSpot interface (if bridged, the bridge port name is
showed here); not present for ISDN, PPTP and L2TP
•
Framed-IP-Address - IP address of HotSpot client after Universal Client translation
•
Mikrotik-Host-IP - IP address of HotSpot client before Universal Client translation (the original IP
address of the client)
•
User-Name - client login name
•
MS-CHAP-Domain - User domain, if present
•
Mikrotik-Realm - If it is set in /radius menu, it is included in every RADIUS request as Mikrotik-
Realm attribute. If it is not set, the same value is sent as in MS-CHAP-Domain attribute (if MS-
CHAP-Domain is missing, Realm is not included neither)
•
WISPr-Location-ID - text string specified in radius-location-id property of the HotSpot server
•
WISPr-Location-Name - text string specified in radius-location-name property of the HotSpot
server
•
WISPr-Logoff-URL - full link to the login page (for example, http://10.48.0.1/lv/logout)
HotSpot uses CHAP by default and may use also PAP if unencrypted passwords are enabled, it can not
use MSCHAP
Depending on authentication methods:
•
User-Password - encrypted password (used with PAP authentication)
•
CHAP-Password, CHAP-Challenge - encrypted password and challenge (used with CHAP
authentication)
•
MS-CHAP-Response, MS-CHAP-Challenge - encrypted password and challenge (used with MS-
CHAPv1 authentication)
•
MS-CHAP2-Response, MS-CHAP-Challenge - encrypted password and challenge (used with
MS-CHAPv2 authentication)
Access-Accept
•
Framed-IP-Address - IP address given to client. If address belongs to 127.0.0.0/8 or 224.0.0.0/3
networks, IP pool is used from the default profile to allocate client IP address. If Framed-IP-Address is
specified, Framed-Pool is ignored
•
Framed-IP-Netmask - client netmask. PPPs - if specified, a route will be created to the network
Framed-IP-Address belongs to via the Framed-IP-Address gateway; HotSpot - ignored by HotSpot
•
Framed-Pool - IP pool name (on the router) from which to get IP address for the client. If Framed-
IP-Address is specified, this attribute is ignored
If Framed-IP-Address or Framed-Pool is specified it overrides remote-address in default configuration
•
Idle-Timeout - overrides idle-timeout in the default configuration
•
Session-Timeout - overrides session-timeout in the default configuration
•
Port-Limit - maximal mumber of simultaneous connections using the same username (overrides te
shared-users property of the HotSpot user profile)
•
Class - cookie, will be included in Accounting-Request unchanged
•
Framed-Route - routes to add on the server. Format is specified in RFC2865 (Ch. 5.22), can be
specified as many times as needed
•
Filter-Id - firewall filter chain name. It is used to make a dynamic firewall rule. Firewall chain name
can have suffix .in or .out, that will install rule only for incoming or outgoing traffic. Multiple Filter-id
can be provided, but only last ones for incoming and outgoing is used. For PPPs - filter rules in ppp
chain that will jump to the specified chain, if a packet has come to/from the client (that means that