Allied Telesis AT-WR4500 - Manual (Page 263)

AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers 263
RouterOS v3 Configuration and User Guide
12.4.3
Health Graphing
Submenu level: /tool graphing health
Description
This submenu provides information about RouterBoard's 'health' - voltage and temperature. For this
option, you have to install the routerboard package.
Property Description
allow-address (IP address/netmask; default: 0.0.0.0/0) - network which is allowed to view graphs of
router health
store-on-disk (yes | no; default: yes) - whether to store information about traffic on system drive or
not. If not, the information will be stored in RAM and will be lost after a reboot
12.4.4
Interface Graphing
Submenu level: /tool graphing interface
Description
Shows how much traffic is passed through an interface over a period of time.
Property Description
allow-address (IP address/netmask; default: 0.0.0.0/0) - IP address range which is allowed to view
information about the interface. If a client PC not belonging to this IP address range tries to open
http://[Router_IP_address]/graphs/, it will not see this entry
interface (name; default: all) - name of the interface which will be monitored
store-on-disk (yes | no; default: yes) - whether to store information about traffic on system drive or
not. If not, the information will be stored in RAM and will be lost after a reboot
Example
To monitor traffic which is passed through interface ether1 only from local network 192.168.0.0/24,
and write information on disk:
[admin@AT-WR4562] tool graphing interface> add interface=ether1 \
\... allow-address=192.168.0.0/24 store-on-disk=yes
[admin@AT-WR4562] tool graphing interface> print
Flags: X - disabled
# INTERFACE ALLOW-ADDRESS STORE-ON-DISK
0 ether1 192.168.0.0/24 yes
[admin@AT-WR4562] tool graphing interface>
12.4.5
Simple Queue Graphing
Submenu level: /tool graphing queue
Description
In this submenu you can specify a queue from the /queue simple list to make a graphic for it.
Property Description
allow-address (IP address/netmask; default: 0.0.0.0/0) - network which is allowed to view graphs of
router health
allow-target (yes | no; default: yes) - whether to allow access to web graphing from IP range that is
specified in /queue simple target-address
simple-queue (name; default: all) - name of simple queue which will be monitored
store-on-disk (yes | no; default: yes) - whether to store information about traffic on hard drive or not.
If not, the information will be stored in RAM and will be lost after a reboot