Allied Telesis AT-WR4500 - Manual (Page 26)

26 AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
RouterOS v3 Configuration and User Guide
Example
Suppose we need to cancel security package uninstallation action scheduled on reboot:
[admin@AT-WR4562] system package> print
Flags: X – disabled
# NAME VERSION SCHEDULED
0 routeros-rb500 3.0
1 system 3.0
2 X ipv6 3.0
3 ntp 3.0
4 wireless 3.0
5 dhcp 3.0
6 routing 3.0
7 routerboard 3.0
8 advanced-tools 3.0
9 hotspot 3.0
10 ppp 3.0
11 security 3.0 scheduled for uninstall
[admin@AT-WR4562] system package> unschedule security
[admin@AT-WR4562] system package>
3.3.7
System Upgrade
Submenu level: /system upgrade
Description
This submenu gives you the ability to download RouterOS software packages from a remote RouterOS
router.
Step-by-Step
•
Upload desired RouterOS packages to a router (not the one that you will upgrade).
•
Add this router's IP address, user name and password to /system upgrade upgrade-package-
source on the router(s) you will be upgrading. This step will only be needed once, and you may
continue using the same package source in future to upgrade the router(s) again. See the next section
for details.
•
Refresh available software package list /system upgrade refresh
•
See available packages, using /system upgrade print command
•
Download selected or all packages from the remote router, using the download or download-all
• command
Property Description
name (read-only: name) - package name
source (read-only: IP address) - source IP address of the router from which the package list entry is
retrieved
status (read-only: available | scheduled | downloading | downloaded | installed) - package status
version (read-only: text) - version of the package
Command Description
download - download packages from list by specifying their numbers
download-all - download all packages that are needed for the upgrade (packages which are listed in the
/system package print command output)
refresh - updates currently available package list