Allied Telesis AT-2746FX User Manual

Installation guide, Ethernet network adapters

Ethernet
Network
Adapters

AT-2450FTX, AT-2451FTX,
AT-2700FX, AT-2701FX,
AT-2700FTX, AT-2701FTX,
AT-2745FX, AT-2746FX

Installation
Guide

PN 613-50669-00 Rev A

This manual is related to the following products:

AT-2745FX AT-2701FTX AT-2700FTX AT-2701FX AT-2700FX AT-2451FTX AT-2450FTX

Table of contents

Document Outline

Contents
Preface
- Document Conventions
- Where to Find Web-based Guides
- Contacting Allied Telesyn
Chapter 1
Network Adapter Card Overview
- Overview
- AT-2450FTX and AT-2451FTX Series
  - Specifications
  - LEDs
- AT-2700FX and AT-2701FX Series
  - Specifications
  - LED
- AT-2700FTX and AT-2701FTX Series
  - Specifications
  - LEDs
- AT-2745FX and AT-2746FX Series
  - Specifications
  - LEDs
- Additional Features
Chapter 2
Installing a Network Adapter Card
- Verifying Package Contents
- Reviewing Safety Precautions
- Installing the Low Profile Bracket
- Installing a Network Adapter Card
Chapter 3
Microsoft Windows 2000, 2003, and XP
- Choosing a Network Adapter Card Driver
- Installing or Updating a Driver Using the AT-Setup Utility
- Creating a Driver Installation Disk
- Manually Installing a Driver
- Manually Updating a Driver
- Removing a Driver
- Running AT-Setup to Complete Driver Installation
- Configuring the Network Adapter Card Settings
  - Configuring the IP Address, Subnet Mask, and Gateway Address
  - Configuring Additional Network Adapter Card Settings
Chapter 4
Microsoft Windows NT 4.0
- Installing the Driver on a Microsoft Windows NT 4.0 System
- Removing the Driver from a Windows NT 4.0 System
Chapter 5
Novell Netware 6.5
- Installing the Network Adapter Driver on a Novell NetWare 6.5 System
Chapter 6
Linux 2.4 and 2.6
- Installing the ATNIC Driver on Linux 2.4
- Setting the Adapter’s Speed and Duplex Mode on Linux 2.6
  - Phase 1
  - Phase 2
Chapter 7
Solaris 9
- Supported Operating System
- Installing the Driver
- Configuring the Network Adapter Card
- Removing the Driver
Chapter 8
AT-Stat Utility
- Installing the AT-Stat Utility
  - Installing with a CD Drive
  - Installing without a CD Drive
- Using the AT-Stat Utility
- Removing the AT-Stat Utility
Chapter 9
AT-MUX Multiple VLAN Protocol
- AT-MUX Protocol Overview
- Installing the AT-MUX Protocol
- Adding, Changing, or Deleting VIDs
- Removing the AT-MUX Protocol
Chapter 10
AT-Diag Utility
- Starting the AT-Diag Utility
- Diagnostics Tests Option
- Communications Test Option
- Hardware Information Option
- Settings Option
- Select Adapter Option
- Technical Support Option
Chapter 11
Troubleshooting
Appendix A
Technical Specifications
- Physical Specifications
- Operating Voltage
- Environmental Specifications
- Electrical Safety and Emissions Standards
- Twisted Pair Port Pin-outs
Appendix B
Unattended Microsoft Windows Installations
- Unattended Microsoft Windows XP Installation
  - What the Steps Do
  - Unattended Setup
Appendix C
Optional BootPROM Chip and DIP Switch Settings
- Installing a BootPROM Chip
- DIP Switch Settings
Appendix D
Cleaning Fiber Optic Connectors
- Using a Cartridge-Type Cleaner
- Using a Swab
Appendix E
Translated Safety Statements
Index
- A
- B
- C
- D
- F
- G
- I
- L
- M
- N
- P
- Q
- R
- S
- T
- U
- V
- W