Allied Telesis AT-WR4500 - Manual (Page 134)

134 AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
RouterOS v3 Configuration and User Guide
port (integer; default: 1700) - The port number to listen for the requests on
RouterOS doesn't support POD (Packet of Disconnect) the other RADIUS access request packet that
performs a similar function as Disconnect Messages
7.1.4
Suggested RADIUS Servers
Description
RouterOS RADIUS Client should work well with all RFC compliant servers. It has been tested with:
•
FreeRADIUS
•
XTRadius (does not currently support MS-CHAP)
•
Steel-Belted Radius
7.1.5
Supported RADIUS Attributes
Description
MikroTik RADIUS Dictionaries
Here you can download MikroTik reference dictionary , which incorporates all the needed RADIUS
attributes. This dictionary is the minimal dictionary, which is enough to support all features of RouterOS.
It is designed for FreeRADIUS, but may also be used with many other UNIX RADIUS servers (eg.
XTRadius).
It may conflict with the default configuration files of RADIUS server, which have references to the
Attributes, absent in this dictionary. Please correct the configuration files, not the dictionary, as no other
Attributes are supported by RouterOS.
There is also
dictionary.mikrotik that can be included in an existing dictionary to support RouterOS
vendor-specific Attributes.
Definitions
•
PPPs - PPP, PPTP, PPPoE and ISDN
• default configuration - settings in default profile (for PPPs) or HotSpot server settings (for
HotSpot)
Access-Request
•
Service-Type - always is "Framed" (only for PPPs)
• Framed-Protocol - always is "PPP" (only for PPPs)
•
NAS-Identifier - router identity
•
NAS-IP-Address - IP address of the router itself
•
NAS-Port - unique session ID
•
Acct-Session-Id - unique session ID
• NAS-Port-Type - async PPP - "Async"; PPTP and L2TP - "Virtual"; PPPoE - "Ethernet"; ISDN -
"ISDN Sync"; HotSpot - "Ethernet | Cable | Wireless-802.11" (according to the value of nas-port-
type parameter in /ip hotspot profile
•
Calling-Station-Id - PPPoE and HotSpot- client MAC address in capital letters; PPTP and L2TP -
client public IP address; ISDN - client MSN
• Called-Station-Id - PPPoE - service name; PPTP and L2TP - server IP address; ISDN - interface
MSN; HotSpot - name of the HotSpot server