Beijer Electronics SCOM RBC EN - Manual (Page 54)

Command Reference
54 Beijer Electronics, MAEN993
Response Message (Acknowledge)
Response Message (Negative Acknowledge)
Under normal operation conditions, a device never sends a negative acknowledge in
response to this command.
Maximum Lr for this Command
9
Example
Set the keypress mode of the device at address 0.3 (group 0, address 3) to the default
brightness value:
According to the data returned by the device at address 0.3 (group 0, address 3), the
keypress mode is set to the default brightness value:
0 1 2 3 4 5 6 7 8
0x06 ADR 0x4C 0x41 0x55 0x01 ICHKH Ret ICHKD
Ret
Value: 0x00: Brightness is set to darkest possible value (off)
0x01: Brightness is set to the value of the last received SCOM
BRT command
0x02: Brightness is set to default brightness value
0x03: Brightness is set to brightest possible value
0x04: Brightness does not change
Type: Byte
Length: 1
Description: Indicates current keypress mode
0 1 2 3 4 5 6 7...9 10
0x07 0x03 0x4C 0x41 0x55 0x03 0x10 0x01 0xAA 0x02 0x52
0 1 2 3 4 5 6 7 8
0x06 0xE7 0x4C 0x41 0x55 0x01 0x13 0x02 0xFD