Beijer Electronics SCOM RBC EN - Manual (Page 24)

Command Reference
24 Beijer Electronics, MAEN993
5.6.2 LAU_CONFIG_GETMANUFACTURER
(0x010C)
Manufacturer
Requests the manufacturer ID from the device. The manufacturer ID is a short, max.
7 character ASCII-string containing the manufacturer specific code. For devices
manufactured by Beijer Electronics, the returned code is always “LAU”. Actually, this
command returns the same value as the standard SCOM command “MAN”.
Supported since Firmware Version
LAUER RBC: 0.0.0.1
Command Stream
Response Message (Acknowledge)
Response Message (Negative Acknowledge)
Under normal operation conditions, a device never sends a negative acknowledge in
response to this command.
Maximum Lr for this Command
15
Example
Query the manufacturer ID of the device at address 0.7 (group 0, address 7):
The device at address 0.7 (group 0, address 7) has returned “0x4C 0x41 0x55”, which
represents the ASCII-string “LAU”, indicating that the device is manufactured by
Beijer Electronics:
0 1 2 3 4 5 6 7...8 9
0x07 ADR 0x4C 0x41 0x55 0x02 ICHKH 0x01 0x0C ICHKD
0 1 2 3 4 5 6 7...7+[LEN]-1 7+[LEN]
0x06 ADR 0x4C 0x41 0x55 LEN ICHKH Ret ICHKD
Ret
Value: ASCII characters
Type: String
Length: 0...7
Description: ASCII-string containing the manufacturer ID
0 1 2 3 4 5 6 7...8 9
0x07 0x07 0x4C 0x41 0x55 0x02 0x0D 0x01 0x0C 0xF2
0 1 2 3 4 5 6 7...9 10
0x06 0x07 0x4C 0x41 0x55 0x03 0x0D 0x4C 0x41 0x55 0x1D