Beijer Electronics SCOM RBC EN - Manual (Page 39)

Command Reference
Beijer Electronics, MAEN993 39
Example
Set the device at address 0.7 (group 0, address 7) in the mode to override the DIL
settings (i.e. device address and serial interface mode) with software settings:
According to the data returned by the device at address 0.7 (group 0, address 7), the
device uses software settings:
0 1 2 3 4 5 6 7...9 10
0x07 0x07 0x4C 0x41 0x55 0x03 0x0C 0x01 0x8E 0x01 0x6F
0 1 2 3 4 5 6 7 8
0x06 0x07 0x4C 0x41 0x55 0x01 0x0F 0x01 0xFE