Beijer Electronics SCOM RBC EN - Manual (Page 25)

Command Reference
Beijer Electronics, MAEN993 25
5.6.3 LAU_CONFIG_GETDEVICENAME (0x010D)
Device Name
Returns the device type and model. Actually, this command returns the same value
as the standard SCOM command “TYP”.
Supported since Firmware Version
LAUER RBC: 0.0.0.1
Command Stream
Response Message (Acknowledge)
Response Message (Negative Acknowledge)
Under normal operation conditions, a device never sends a negative acknowledge in
response to this command.
Maximum Lr for this Command
23
Example
Query the unit type and model of the device at address 0.7 (group 0, address 7):
According to the data returned by the device at address 0.7 (group 0, address 7), this
is a Beijer Electronics RBC:
0 1 2 3 4 5 6 7...8 9
0x07 ADR 0x4C 0x41 0x55 0x02 ICHKH 0x01 0x0D ICHKD
0 1 2 3 4 5 6 7...7+[LEN]-1 7+[LEN]
0x06 ADR 0x4C 0x41 0x55 LEN ICHKH Ret ICHKD
Ret
Value: ASCII characters
Type: String
Length: 0...15
Description: Device type and model
0 1 2 3 4 5 6 7...8 9
0x07 0x07 0x4C 0x41 0x55 0x02 0x0D 0x01 0x0D 0xF1
0 1 2 3 4 5 6 7...15
0x06 0x07 0x4C 0x41 0x55 0x0E 0x02 0x4C 0x61 0x75 0x65
7...15 16
0x72 0x20 0x52 0x42 0x43 0x0F