Foreword – Beijer Electronics SCOM RBC EN User Manual

Page 2

Foreword

Beijer Electronics, MAEN993

SCOM Protocol on RBC

Foreword

The Lauer SCOM Protocol is designed for controlling different Beijer Electronics
devices remotely over different kind of interfaces. It is based on the SCOM Protocol,
allowing easy replacement of existing units. Besides the standard command set, the
Lauer SCOM Protocol includes a rich set of special purpose commands for extended
remote controlling options. The SCOM Protocol is extended with these special fea-
tures, without affecting the compatibility.

Some of the major extensions are:

• Special purpose command set available with the new SCOM command “LAU”.

• Extended address field functionality, which enables device grouping, allowing a to-

tal count of 240 devices in a network (15 groups, 16 devices in each group).

All examples in the manual are intended solely to increase understanding of the software’s functionality and
use. Beijer Electronics AB bears no responsibility if these examples are used in actual applications.
Because of the large number of application areas for this software, users must acquire the appropriate knowl-
edge to use the software properly for their specific applications. Persons responsible for the application must
themselves ensure that each application is in compliance with all relevant requirements, standards and legisla-
tion in respect to configuration and safety.
Beijer Electronics AB assumes no responsibility for damages that may occur during installation or use of the
software.
Beijer Electronics AB hereby forbids all modification of the software.