Pulsafeeder MPC - Manual (Page 30)

Factory Re-initialization is typically not required. When re-
initializing your MPC, all of the system settings and calibration
information will be overwritten by the original factory default
settings. The controller must be re-configured and re-calibrated to
your specifications.
A Factory Re-initialization should be performed only if there is reason to
believe that the internal MPC memory has become corrupted. The
condition usually manifests itself with inconsistent or erratic operation –
often associated with meaningless characters on the display, or
exaggerated numerical values.
Factory Re-Initialization:
1. Press the MENU key to access the System Setup Menu
- M E N U -
C A L I B R A T I O N
2. Press the UP arrow key to display
- M E N U -
S Y S T E M S E T U P
3. Press the ENTER key
S Y S T E M S E T U P
S E C U R I T Y
4. Press the UP arrow key twice to display
S Y S T E M S E T U P
F A C T O R Y I N I T
5. Press the ENTER key
P R E S S E N T E R
T O F A C T O R Y I N I T
6. Press the ENTER key
A R E Y O U S U R E ?
Y E S = E N T E R N O = M E N U
7. Press the ENTER key
R E S E T T I N G P U M P
T O F A C T O R Y I N I T