Pulsafeeder MPC - Manual (Page 28)

9.2 Keypad/Lamp Operation
Key Function Description
Motor On/Off
Press to start pump motor, press again to stop
pump motor
Auto/Manual
Press to toggle between automatic operation and
manual control of the pump
Menu
Press to adjust controller settings, to exit the menu
system, to move cursor back when entering
values, or to step back to higher level menus
Enter
Press to accept changes in menus, to move
cursor forward when entering values, and to
access lower level menus. Also used to toggle
between pump output display options while in
operating mode (% flow, spm, gph, etc.)
Arrow Up
Press to adjust values upwards, and to scroll
through menu options
Arrow Down
Press to adjust values downwards, and to scroll
through menu options
Lamp Color Description
Green, Amber,
Red, Off
Off = Motor off Green = Motor on
Amber = Remote standby Red (blinking) =
Error
Green, Off
Green = Manual Control Off = Automatic
Control
Table 3 – Keypad and Lamp Operation
9.3 Confirm Display and Keypad Functionality
The example display messages are shown in English for
demonstration purposes. If an alternate language has been set, the
text is displayed as a translation of the English version.
MANUAL
ON