Danger, Appendix c--troubleshooting – Lyntec RPC User Manual
Page 51
139-0498-01.51
51
Appendix C--Troubleshooting/FAQ
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
•
This equipment must be installed and serviced only by
qualifi ed electrical personnel.
•
Apply appropriate personal protective equipment (PPE) and
follow safe electrical work practices. See NFPA 70E.
•
Carefully inspect the work area for tools and objects that
may have been left inside the equipment.
•
Use caution while removing or installing panels so that they
do not extend into the energized bus; avoid handling the
panels, which could cause personal injury.
Failure to follow this instruction will result in death or
serious injury.
Appendix C--Troubleshooting
TROUBLESHOOTING THE
CONTROLLER
Use the following table if you need to troubleshoot the RPC
controller.
DANGER
!