Nikon S810c User Manual
Page 157
E
31
Re
ference
B
Notes About Continuous Shooting
• When a setting other than Single is selected, the flash is disabled. Focus,
exposure, and white balance are fixed at the values determined with the first
image in each series.
• It may take some time to save the images after shooting.
• When ISO sensitivity increases, noise may appear in images taken.
• The frame rate with continuous shooting may vary depending on the current
image mode setting, the memory card used, or shooting conditions.
• When using Continuous H: 120 fps, Continuous H: 60 fps or Multi-shot 16,
banding or variance in brightness or hue may occur in images that were taken
under lighting that flickers at high speeds, such as fluorescent, mercury-vapor, or
sodium-vapor lighting.
• The setting may not be changed when using certain settings of other functions.
j BSS (Best Shot
Selector)
When BSS is on, the camera takes up to 10 images
while the shutter-release button is pressed all the
way down. The sharpest image in the series is
automatically selected and saved. Use when
shooting a stationary subject in a place where flash
photography is prohibited and camera shake is
likely to occur.
W Multi-shot 16
Each time the shutter-
release button is pressed all
the way down, the camera
captures a series of 16
images and saves it as a
single image.
• The frame rate for
continuous shooting is about 30 fps.
• Image mode is fixed at L (image size: 2560 ×
1920 pixels).
• Digital zoom is not available.
Option
Description