Nikon S810c - Manual (Page 143)

E 17
Re
ference
S
ec
ti
o
n
Configuring the Connection Settings Between the
Camera and Your Smart Device (Simple Setup)
Once you perform the simple setup procedure, you can connect the camera to
your smart device without configuring the settings the next time you connect.
1
Open the Connect to S810c application on the smart
device screen.
• The Connect to S810c application must be installed on your smart device
( E16).
2
Open Upload to smart device on the camera.
• Tap
Upload on the home screen to open Upload to smart device. See
“Activating the Main Applications” ( A80) for more information.
3
Tap Simple setup on the camera
screen.
• After that, tap Simple setup on the smart
device screen.
4
Tap START on the camera screen.
• After that, tap START on the smart device
screen.
• Position the camera near the smart device while
the Searching... screen is displayed.
Simple setup
Upload to smart device
15:30
START
Simple setup
Upload to smart device
Start the app on the smart device and
tap START.
15:30