Nikon COOLPIX-A - Manual (Page 201)

181
U
Choose the flash mode for the built-in flash.
Choose the setting or settings bracketed when auto bracketing
(
0 123) is in effect. Choose AE bracketing (0 124) to bracket
exposure, WB bracketing ( 0 124) to perform white-balance
bracketing ( 0 123), or ADL bracketing (0 125) to perform
bracketing using Active D-Lighting ( 0 110). Note that white
balance bracketing is not available at image quality settings of NEF
(RAW) or NEF (RAW) + JPEG.
Flash Cntrl for Built-in
Flash
G button
➜ C shooting menu
Option Description
1 TTL
Flash output is adjusted automatically in response to
shooting conditions.
2 Manual
Choose a flash level between Full and 1/32 ( 1 /
32
of full
power). The camera does not emit monitor pre-flashes.
A
Manual
A Y icon flashes in the monitor when Manual is selected and the flash
is raised.
A
The SB-400
When an optional SB-400 flash unit is attached and turned on, Flash
cntrl for built-in flash changes to Optional flash, allowing the flash
control mode for the SB-400 to be selected from TTL and Manual.
Auto Bracketing Set
G button
➜ C shooting menu