Nikon COOLPIX-A - Manual (Page 191)

171
Q
HDMI Options
The HDMI option in the setup menu controls output resolution
and can be used to enable the camera for remote control from
devices that support HDMI-CEC (High-Definition Multimedia
Interface–Consumer Electronics Control, a standard that allows
HDMI devices to be used to control peripherals to which they are
connected). Note that when connected to an HDMI-CEC device,
the camera will turn off automatically if no operations are
performed for 30 minutes, regardess of the option selected for
Auto off timer.
❚❚Output Resolution
Choose the format for images output to the
HDMI device. If Auto is selected, the camera
will automatically select the appropriate
format. Regardless of the option selected,
Auto will be used for movie recording and
playback.
❚❚Device Control
If On is selected for HDMI > Device
control in the setup menu when the
camera is connected to a television that
supports HDMI-CEC and both the camera
and television are on, the display shown
at right will appear on the television and
the television remote can be used in place of the camera multi
selector and
J button during full-frame playback and slide shows.
If Off is selected, the television remote can not be used to control
the camera.