Nikon COOLPIX-A - Manual (Page 115)

95
r
3
Select Measure.
Highlight Measure and press 2. The
menu shown at right will be displayed;
highlight Yes and press
J.
The message shown at right will be
displayed before the camera enters
preset measurement mode.
When the camera is ready to measure
white balance, a flashing
L will appear
in the monitor.
4
Measure white balance.
Before the indicator stops flashing,
frame the reference object so that it fills
the display and press the shutter-release
button all the way down. No photograph will be recorded;
white balance can be measured accurately even when the
camera is not in focus.
D
Preset White Balance
The camera can store only one value for preset white balance at a
time; the existing value will be replaced when a new value is
measured.
A
Default Preset White Balance
The default value for preset white balance is 5200 K, the same as
Direct sunlight.