Blodgett CNVX-14E - Manual (Page 11)

7
Installation
Caster attachment
1. Place a level on the floor where the casters are to
rest.
2. Place shims under the low side until it is level.
3. Mount the shims between the casters and the oven
as follows:
a. Align the shims and caster holes with the bolt
holes.
b. Secure with the 1/2” bolts provided.
NOTE: Install them with the locking casters in the
front of the oven. The rear casters do not
lock. Ensure that the locks are set on the
front casters.
4. Tip the oven up on the newly installed casters.
Figure 3
Add shims as necessary
Floor
Exaggerated for clarity