beautypg.com

Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT User Manual

Page 86

background image

Allied Telesyn

AT-VIEW PLUS

DEVICE MANAGEMENT



Detail Status

Displays information such as port name, LED status and polarity.

Note

- A link between a port on the hub and a port on another device can only be

established if the port on the other device is configured to auto-negotiate.


Security Info

Displays source MAC addresses of frames received on the port.

Note

- Valid MIB Set values for the Learn Action parameter are 'inactive' and 'active'.

Attempting to set this parameter to any other value will result in the error message "The
error occurred with 'Set' operation. Error: bad value.".

Note

- The current firmware version does not allow the user to configure the MAC

Address parameter. Attempting to configure it will result in the error message "The error
occurred with 'Set' operation. Error: bad value.".


Enable

Enables the port.


Disable

Disables the port.

AT-FH800u

PN 613-50665-00 Rev B

Page 86 of 277