Bridge menu, Rmon menu, Bridge menu rmon menu – Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT User Manual
Page 53: Port menu

Allied Telesyn
AT-VIEW PLUS
DEVICE MANAGEMENT
WEB Browser
Connects to the switch's HTTP server.
Bridge Menu
From the Bridge menu, you can view and edit bridge information, such as the forwarding
database and spanning tree status.
Forwarding Database
Displays the Forwarding Database table.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but discarded
because either there was a lack of memory or the entry's aging timer expired.
Note
- Valid MIB Set values for the Aging Time parameter should range from 10 to 412.
However, the current firmware version allows it to be set to a value greater than 412 all
the way up to 1000000.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Statistics
Displays statistics about frames received/transmitted on the switch's ports.
RMON Menu
From the RMON menu, you can view and edit the RMON mib.
Statistics
Displays traffic statistics in the network segment attached to each port.
History Control Table
Displays the RMON history table.
Alarm Table
Displays the RMON alarm table.
Event Table
Displays the RMON event table.
Event Log
Displays the RMON event log.
PN 613-50665-00 Rev B
Page 53 of 277