Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT - Manual (Page 247)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Device Manager LEDs for AT-PBC18
LED State Description
PWR Green
Gray
The main power supply is installed and power is on.
The main power supply is not installed or it is installed but not
powered on.
RPS Green
Gray
The optional redundant power supply is installed and power is on.
The optional redundant power supply is not installed or it is installed
but not powered on.
Note - The current firmware version does not allow AT-View Plus Device Manager to support
the Reset button.
Agent Menu
From the Agent Menu, you can view and edit the system information for the chassis, or log into
the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Note - AT-View Plus Device Manager allows the user to enter more than 20 characters
for the System Name parameter. However, doing so will result in the following error
message: "The error occurred with 'Set' operation. Error: bad value."
System Date and Time
Displays system configuration for system date and time.
Network Info
Displays network-related information such as the addresses of the default gateway and the
agents.
Note -The Default Domain Name parameter returns unrecognizable characters.
FAN Info
Displays fan speed.
Management Module Temperature
Displays the actual temperature of the management module.
Chassis Temperature
Displays the actual temperature of the chassis.
PN 613-50665-00 Rev B Page 247 of 277