Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT - Manual (Page 224)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Firmware Info
Displays a list of software releases installed on the switch.
Power Supply Info
Displays information about the power supply.
File List
Displays a list of the files in the switch's file system.
Config File Name
Displays the file name of the start-up configuration file.
Chassis Temperature and Fan Info
Displays the actual temperature of the switch, the temperature status, and the fan status.
Reset
Reset Cold resets the hardware and executes the default configuration file. Reset Warm
performs a warm start of the software modules and executes the default configuration file.
Telnet
Starts a Telnet connection to the switch.
WEB browser
Opens your web browser and connects to the switch's HTTP server.
Note - The web browser can only contact the device if the device has a valid resource file
loaded and set, and the HTTP server and GUI on the device are enabled.
Routing Menu
From the Routing menu, you can view and edit information about the switch's IP routing
functions.
ARP Table
Displays the ARP cache on the switch.
Address Table
Displays the list of IP interfaces on the switch.
Route Table
Displays the IP routing table on the switch.
IP Statistics
Displays statistics about IP, such as the number of IP datagrams received.
ICMP Statistics
Displays statistics about ICMP, such as the number of ICMP datagrams received.
PN 613-50665-00 Rev B Page 224 of 277