Led status, Utilization, Device-specific menu items – Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT User Manual

Page 15: Led status utilization device-specific menu items

Text mode
Original mode

Allied Telesyn

AT-VIEW PLUS

DEVICE MANAGEMENT

LED status

In AT-View Plus Device Manager, LEDs do not blink. The meanings of LEDs differ between
devices.

Utilization

Utilization is calculated by the following formula.

# of frames x (96 + 64) + octets x 8

Utilization (%) = ------------------------------------------- x 100

Port speed (bps) x Sampling Interval(sec)

Device-Specific Menu Items

When using SNMPv3, some device-specific menu items may not be available (disabled)
depending on the READ VIEW access settings of the User Account Name used.

Basic Operations

PN 613-50665-00 Rev B

Page 15 of 277