Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT - Manual (Page 149)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Note - The Mirroring Source Module, Mirroring Source Port and Mirroring Destination
Module parameters are not applicable to the AT-8500 series and should be ignored.
MAC Address Security
Displays MAC Address Security parameters and allows you to set the security level for
dynamic and static MAC addresses learned and assigned to a port.
Note - The current firmware version allows the Security Threshold parameter to be set to
a value in the range [1-255] inclusive.
DoS Defense
Displays DoS Defense parameters and allows you to enable/disable a defense mechanism
on a port.
Note - The Module ID and Port Number parameters under each Attack Type option do
not return valid values. They return "noSuchName.", "No such instance" or NULL.
Stacking Menu
From the Stacking menu, you can access slave switches and other Master switches in the
enhanced stack.
Stacking Info
Displays Enahanced Stacking parameters, allows you to set the switch's enhanced
stacking status and select a switch to manage in the enhanced stack.
PN 613-50665-00 Rev B Page 149 of 277