Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT - Manual (Page 223)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
AT-9924T/4SP
Device Manager LEDs for AT-9924T, AT-9924SP, AT-9924T/4SP
LED State Description
PWR 1 and
PWR 2 Green
Gray
Red
There is a power supply unit (PSU) in the PSU bay, and it is
supplying power to the switch.
There is a functioning Fan Only Module (FOM) in the PSU bay.
Either:
- there is no PSU or FOM in the PSU bay, or
- a PSU is installed but has a power supply or fan fault, or its
temperature has exceeded its recommended threshold, or
- an FOM is installed and a fan has failed.
Note - No FOM is OK for AT-9924T and AT-9924SP.
Duplex Green
Orange
Gray
The port is operating at full duplex.
The port is operating at half duplex.
The port has no link.
Agent Menu
From the Agent menu, you can view and edit the system information for the switch, or log into
the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
PN 613-50665-00 Rev B Page 223 of 277