Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT - Manual (Page 240)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Device Manager LEDs for AT-MPB3000
LED State Description
PWR1 Green
Gray
Power supply 1 is installed and power is on.
Power supply 1 is not installed or it is installed but not
powered on.
PWR2 Green
Gray
Power supply 2 is installed and power is on.
Power supply 2 is not installed or it is installed but not
powered on.
RPS Green
Gray
The optional redundant power supply is installed and power
is on.
The optional redundant power supply is not installed or it is
installed but not powered on.
Agent Menu
From the Agent Menu, you can view and edit the system information for the chassis, or log into
the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Note - AT-View Plus Device Manager allows the user to enter up to 112 characters for
the System Contact parameter, 132 characters for the System Name parameter, and 92
characters for the System Location parameter. However, entering more than 19 characters
for any one of these parameters may affect the values of the other two parameters.
Temperature Info
Displays the actual temperature of the chassis.
Power Info
Displays power supply status.
Telnet
Starts a Telnet connection to the chassis.
PN 613-50665-00 Rev B Page 240 of 277