Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT - Manual (Page 84)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
System Info
Displays basic system information, including system name, location, contact and
description.
Network Info
Displays network-related information such as the device's IP address, and the default
gateway address.
Note - The current firmware version returns 'noSuchName' for the following parameters:
• Server Slip Address
• Host Slip Address
• Temporary Server Slip Address
• Temporary Host Slip Address
Firmware Info
Displays the version of the software running on the managed device.
Manager Address Info
Displays the management station's IP address.
Note - The current firmware version does not allow the Status parameter to be set to
'under change'. Attempting to set it to 'under change' will result in the error message "The
error occurred with 'Set' operation. Error: bad value.".
Note - By default, the Status parameters are set to 'invalid'. To be able to set them to
'valid', their corresponding IP Address parameters must first be set to valid values. Failing
to do so will result in the error message "The error occurred with 'Set' operation. Error:
time out occured."
Reset
Resets the system
Telnet
Starts a Telnet connection to the hub.
WEB Browser
Connects to the hub's HTTP server.
Hub Menu
From the Hub menu, you can check traffic statistics and hub's status. It also lets you perform a
self-test.
Status
Displays hub information such as stacking status.
Module Menu
PN 613-50665-00 Rev B Page 84 of 277