Allied Telesis AlliedView-UM 2.0 - Manual (Page 75)

A. Creating a Configuration File Update Profile
Update Options
1. Upload Options - Choose one of the following options:
• Upload - Uploads the Configuration file only.
• Upload and set - Uploads and sets the configuration file as the Configuration
to be used by the device.
2. File Deletion Options
• Delete old configuration files if memory space is insufficient checkbox - If the
devices to be upgraded have limited memory space (e.g. routers), there
might be a need to delete the existing Configuration files in order to
accommodate the new configuration file. If a Configuration file cannot be
downloaded due to space limitations and this option is checked, AlliedView-
UM will delete any Configuration files residing in the device except for the
currently set Configuration file. If unchecked, and there is not enough space
to accommodate the new Configuration file, AlliedView-UM will fail the
operation.
• Delete currently used configuration file if memory space is insufficient
checkbox - This option will only be enabled if the above option is checked.
Otherwise, it will be grayed out. When this option is checked, AlliedView-
UM will also delete the currently set Configuration file if there is still
insufficient space in the device after deleting the other configuration files.
3. Reboot device after updating checkbox - If the “Upload and set” is chosen for the
Upload Option, this checkbox will be enabled. When checked, AlliedView-UM will
reboot the device after performing the update.
NOTE:
All elements defined in Upload Options panel are disregarded for the AT-8000, AT-8000/8POE, AT-8300GB, AT-9000,
AT-9410GB and AT-9700 families.
NOTE:
All elements defined in Upload Options panel, except "Upload" and "Upload and set", are disregarded for the AT-8400,
AT-8500 and AT-9400 families. All other update options apply only to devices that use AlliedWare™ and AlliedWare
Plus™ management software. During the Configuration File Update operation, AlliedView-UM will ignore the options that
are not applicable.
AlliedView™-UM 2.0 USER’S GUIDE Page 75 of 128