Allied Telesis AlliedView-UM 2.0 - Manual (Page 66)

3. The Load Interim/Maintenance Release Upgrade Profile dialog box will be displayed.
Specify the filename of the profile to be loaded.
4. Finally, click on the button. AlliedView-UM will load the specified
Interim/Maintenance Release Upgrade Operation profile.
NOTE:
The Interim/Maintenance Release Upgrade Operation profile contains the Selected Devices list. While loading, AlliedView-
UM checks each item in this list against the currently loaded devices in the Device Families Pane. Only entries that have a
matching device in the Devices Families Pane will be loaded and added to the Selected Devices list in the
Interim/Maintenance Release Upgrade pane.
A summary window will be displayed indicating which entries were successfully added.
D. Starting the Interim/Maintenance Release Upgrade Operation
The Interim/Maintenance Release Upgrade Operation can only be started when the
parameters have been properly set.
1. Click on the button.
AlliedView™-UM 2.0 USER’S GUIDE Page 66 of 128