Allied Telesis AlliedView-UM 2.0 - Manual (Page 60)

D. Starting the Release Upgrade Operation
The Release Upgrade (AlliedWare), (AlliedWare+) or (Other) Operation can only be
started when the parameters have been properly set.
1. Click on the button.
2. A progress window will be displayed, indicating the overall status of the operation.
When the Release Upgrade operation ends, the Operation Logs pane will be
updated to contain detailed information about the operation for each device.
3. Clicking the or the button will abort the Release Upgrade
(AlliedWare), (AlliedWare+), or (Other) operation. Depending on the time this
button is clicked, the operation may or may not complete for devices that are in
progress. Devices that were not able to complete the operation will have a status of
“Aborted”.
AlliedView™-UM 2.0 USER’S GUIDE Page 60 of 128