Allied Telesis AlliedView-UM 2.0 - Manual (Page 11)

C. Upgrading Software
In this section, we will be performing a simple patch upgrade using the Patch Upgrade
operation. Before proceeding, make sure you have added one or more devices. If you have
not done so, please go back to the previous section, "Creating a Device". You will also need
to have access to an appropriate patch upgrade file for your device.
Click on the button on the Operations Selection Pane. This will
display the Patch Upgrade pane.
Next, locate the upgrade file you will be using by clicking the button. After you have
located and selected your file, click on the option. Check the
checkbox.
Enter the address of the server where the file is located. Make sure you enter the correct
address format. If you have an HTTP server, you should enter a URL address. If you have a
TFTP server, enter an IP Address.
Now, select the devices you will be applying the update to. In the "Available Devices" list
box, you should see the IP Addresses of the devices you added a while ago and for which
the selected patch is applicable to. Select one of those entries and click on the
button. The IP Address that you selected should now appear in the "Selected Devices"
list box.
To start the upgrade process, click on the button.
NOTE:
Upgrading and rebooting a device will make that device unavailable for the duration of the operation. Make sure that you
notify the appropriate groups or people that will be affected before proceeding.
AlliedView™-UM 2.0 USER’S GUIDE Page 11 of 128