Allied Telesis AlliedView-UM 2.0 - Manual (Page 34)

To delete an existing network:
1. Select the network to be deleted by clicking on its entry in the Networks list.
2. Click on the button to remove the network.
3. A confirmation box will be displayed. Click on to complete the deletion.
To start the device discovery:
1. On the Networks list, you will notice that each entry has a corresponding check box.
When checked, the corresponding network will be included in the device discovery
scan. When unchecked, the network will be ignored. Check or uncheck entries to
refine scope of Device Discovery.
2. Click on the button to begin the Device Discovery operation.
3. During the Device Discovery operation, a progress window will be displayed to
show the status of the operation.
4. If you wish to cancel the operation, click on the .
AlliedView™-UM 2.0 USER’S GUIDE Page 34 of 128