Allied Telesis AlliedView-UM 2.0 - Manual (Page 26)

• SNMP Read Community - This is the SNMP Read Community name that
AlliedView-UM will use to retrieve the device’s Model, Serial Number,
System Name, Device Description and Configuration filename. By default,
this value is set to “public”. (This field only applies to devices that use
AlliedWare™ and AlliedWare Plus™ management software.)
• Timeout - When retrieving the device’s Model, Serial Number, System Name,
Device Description and Configuration filename, this is the number of seconds
AlliedView-UM will wait for a response before retrying. (This field only
applies to devices that use AlliedWare™ and AlliedWare Plus™ management
software.)
• Retries - This is the number of times AlliedView-UM will try to retrieve
the device’s Model, Serial Number, System Name, Device Description and
Configuration filename before displaying an error message. (This field only
applies to devices that use AlliedWare™ management software. You may
ignore this field when adding devices that use non-AlliedWare management
software.)
• System Name - This is an arbitrary name for the device.
• System Description - This is an arbitrary description for the device.
• Configuration File - This is the configuration file that will be assigned for
this device.
4. Once the fields in step (3) have been set, click on the button.
AlliedView™-UM 2.0 USER’S GUIDE Page 26 of 128