Allied Telesis AT-8100 Series - Manual (Page 80)

Chapter 5: Setting Port Statistics
80
 Total Frames— Number of transmitted frames.
 Total Error Frames— Number of transmitted frames with errors.
 Multicast Frames— Number of transmitted multicast frames.
 Broadcast Frames— Number of transmitted broadcast frames.
 Pause Frames Sent— Number of transmitted flow-control pause
frames.
 Deferred— Number of egress frames that the port could not
immediately transmit.
 Single Collision— Number of frames that were transmitted after
at least one collision.
 Multi Collision— Number of frames that were transmitted after
more than one collision.
 Late Collision— Number of late collisions.
 Excessive Collision— Number of excessive collisions.
 Total Collision Frames— Total number of collisions on the port.
 MAC Error Frames— Number of frames not transmitted correctly
or dropped due to an internal MAC transmit error.
Displaying
Interface
Statistics
To display the interface statistics, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 24 on page 65.
2. From the Switching tab, hover over Port.
3. Move the cursor to the right and select Statistics.
The Port Statistics page with the Tx + Rx tab selected is displayed.
See Figure 29 on page 76.
4. Click the Interface tab.
The Port Statistics Page with the Interface tab selected is displayed.
See Figure 32 on page 81.