Allied Telesis AT-8100 Series - Manual (Page 104)

Chapter 8: Setting the MAC Address
104
Displaying the Multicast MAC Addresses
To display the multicast MAC addresses, do the following:
1. Hover the cursor over the Switching tab.
The Switching Tab is displayed. See Figure 38 on page 102.
2. Hover over Mac Table and then move the cursor to the right to select
Multicast.
The Multicast MACs Page is displayed. See Figure 40.
Figure 40. Multicast MACs Page
The following fields are displayed:
 MAC Address— Dynamic or static unicast MAC address learned
on or assigned to the port.
 Vlan— ID number of the VLAN where the multicast application and
the host nodes are members. The default VLAN is Vlan1.
 Interface— Port where the address was learned or assigned.
 Type— Type of MAC address entry: static or dynamic.