Allied Telesis AT-8100 Series - Manual (Page 118)

Chapter 9: Link Aggregation Control Protocol (LACP)
118
5. Select the Load Balance Method. Choose from the following:
 Src MAC— Source MAC address as the load distribution method.
 Dst MAC— Destination MAC address.
 Src-Dst MAC— Source address/destination MAC address.
 Src IP— Source IP address.
 Dst IP— Destination IP address.
 Src-Dst IP— Source address/destination IP address.
6. Add or remove the member ports of the aggregator by clicking on the
ports.
A check mark indicates the port has been selected.
7. Click Apply.
A confirmation message is displayed.
8. Click SAVE to save your changes to the startup configuration file.