Allied Telesis AT-8100 Series User Manual
Page 74
Chapter 4: Setting Port Parameters
74
5. Change the following fields as needed:
Broadcast— Enable or disable the broadcast storm control
feature. When this feature is enabled, the port discards ingress
broadcast packets that exceed the specified level. This feature is
disabled by default.
Enter the Level— Enter the maximum number of ingress packets
per second of broadcast packets the port receives. Broadcast
packets that exceed this level are discarded when the feature is
enabled. The range is 0 to 33,554,431 packets. The default is
33,554,431 packets.
Multicast— Enable or disable the multicast storm control feature.
When this feature is enabled, the port discards ingress multicast
packets that exceed the specified level. This feature is disabled by
default.
Enter the Level— Enter the maximum number of ingress packets
per second of multicast packets the port receives. Multicast
packets that exceed this level are discarded when this feature is
enabled. The range is 0 to 33,554,431 packets. The default is
33,554,431 packets.
DLF— Enable or disable the unknown unicast storm control
feature. When this feature is enabled, the port discards ingress
unknown packets that exceed the specified level.This feature is
disabled by default.
Enter the Level— Enter the maximum number of ingress packets
per second of unknown unicast packets the port receives.
Unknown unicast packets that exceed this level are discarded
when this feature is enabled. The range is 0 to 33,554,431
packets. The default is 33,554,431 packets.
6. Click Apply.
7. Click SAVE to save your changes to the startup configuration file.