Allied Telesis AT-8100 Series - Manual (Page 304)

Chapter 25: LLDP and LLDP-MED
304
Selecting LLDP-MED TLVs on a Port
To enable LLDP-MED TLV, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 122 on
page 284.
2. From the Discovery & Monitoring tab, hover over LLDP and then
hover over TLV.
The LLDP TLV tab is displayed. See Figure 126 on page 290.
3. From the LLDP TLV tab, select TLV-MED on the right
The LLDP-MED TLV page is displayed. See Figure 138.
Figure 138. LLDP-MED TLV Page
4. Click Edit next to the port that you want to modify.
The Modify LLDP-MED TLV page is displayed. See Figure 139 on
page 305.