Allied Telesis AT-8100 Series - Manual (Page 218)

Chapter 19: Setting IPv4 and IPv6 Addresses
218
Displaying IPv4 Interfaces
To display a list of the IPv4 interfaces, do the following:
1. Hover the cursor over the Layer 3 tab.
The Layer 3 tab is displayed. See Figure 83.
Figure 83. Layer 3 Tab
2. From the Layer 3 tab drop-down menu, select IPv4 Interfaces.
A list of IPv4 interfaces is displayed. See Figure 84.
Figure 84. IPv4 Interfaces Page
The following fields are displayed:
 VLAN— VLAN number that has an IP interface.
 IP Address— IP address that the VLAN is assigned to.
 Subnet Mask— Subnet mask of the IP address.
 Status— Status of the link.