beautypg.com

Allied Telesis AT-8100 Series User Manual

Page 46

background image

Chapter 3: Basic Switch Parameters

46

Note

Both the Remote Log and Server IP Address fields are used only to
set a remote log server. For information on these fields, see
“Configuring a Remote Log Server” on page 47.

Remote Log— Check the checkbox to enable the switch to send
status and error messages to a remote log server. To disable the
switch to send messages to a remote log server, uncheck the
checkbox.

Server IP Address— Enter the IPv4 address of the remote log
server if you check the Remote Log checkbox above. Enter the IP
address in the IPv4 format: nnn.nnn.nnn.nnn.

5. Click Apply.

6. Click SAVE to save your changes to the startup configuration file.