beautypg.com

Changing the rip settings – Allied Telesis AT-8100 Series User Manual

Page 270

background image

Chapter 23: Setting Dynamic Routes Using RIP

270

Changing the RIP Settings

To change the RIP settings of the VLAN interface, perform the following:

1. Hover the cursor over the Layer 3 tab.

The Layer 3 tab is displayed. See Figure 112 on page 265.

2. From the Layer 3 tab drop-down menu, hover the cursor over RIP,

move the cursor to the right, and select Configuration from the RIP
drop-down menu.

The RIP Configuration page is displayed. See Figure 113 on page 265.

3. Click Edit next to the VLAN that you want to edit.

The RIP Interface page is displayed. See Figure 115 on page 268.

See also other documents in the category Allied Telesis Computer hardware: