Allied Telesis AT-8100 Series - Manual (Page 50)

Chapter 3: Basic Switch Parameters
50
Managing the Configuration File
Within the web browser interface, you can upload a configuration file onto
the switch, download a configuration file from the switch, delete a
configuration file, and save your changes to the current configuration file.
However, to create a new configuration file, you need to access the switch
through the CLI.
See the following procedures:
 “Displaying the Configuration Files” on page 50
 “Setting the Active Configuration File” on page 51
 “Downloading a Configuration File onto Your PC” on page 51
Displaying the
Configuration
Files
To display a list of the configuration files on the switch, do the following:
1. From the Dashboard page, hover the cursor over the System tab.
2. From the System tab drop-down menu, select Configuration Files
from the pull-down menu.
For an example of the Configuration Files page, see Figure 15.
Figure 15. Configuration Files Page
The following fields are displayed:
 Startup Config— Name of the active boot configuration file, which
for the switch of the example is “boot.cfg.”
 File Name— Name of the file.
 File Size— File size in bytes.
 Last Modify— Date the configuration file was last modified. The