Allied Telesis AT-8100 Series - Manual (Page 113)

AT-8100 Series Version 2.2.5.0 Web Interface User’s Guide
113
Displaying LACP Trunks
To display the LACP trunk assignments for all of the switch ports, do the
following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 24 on page 65.
2. From the Switching tab, hover over Link Aggregation.
For an example of the Link Aggregation menu, see Figure 43.
Figure 43. Switching Tab with Link Aggregation Selected
3. Move the cursor to the right and select LACP.
The LACP Trunks page is displayed. See Figure 44.
Figure 44. LACP Trunks Page
4. The following fields are displayed:
 Aggregator ID— ID assigned by the user to the aggregator. It can
be any number between 1-32.