Allied Telesis AT-8100 Series - Manual (Page 307)

AT-8100 Series Version 2.2.5.0 Web Interface User’s Guide
307
Displaying LLDP Neighbor Information
To display LLDP Statistical information, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 122 on
page 284.
2. From the Discovery & Monitoring tab, hover over LLDP, move the
cursor to the right, and then select Neighbors.
The LLDP Neighbors Information page is displayed. See Figure 140.
Figure 140. LLDP Neighbors Information Page
The following fields are displayed:
 Local Port— Port ID.
 Neighbor Chassis ID— ID number of the neighbor’s chassis.
 Neighbor Port Name— Neighbor’s port number that sent the
information.
 Neighbor System Name— Neighbor’s system name.
 System Capabilities— Capabilities that are supported and
enabled on the neighbor. The System Capabilities codes are:
O = Other
P = Repeater
B = Bridge
W = Wireless Access Point
R = Router
T = Telephone