beautypg.com

2 deployment tab, 1 communications, Deployment tab – Campbell Scientific AVW200-series Vibrating Wire Interfaces User Manual

Page 34: Communications, N 5.2.1, On 5.2.1

background image

AVW200-series 2-Channel Vibrating Wire Spectrum Analyzer Modules

FIGURE 5-1. Opening Page in DevConfig

5. Select the Serial Port matching the COM port on your computer in which

the AVW200 is connected.

6. Press the Connect button. The device may take up to 60 seconds to

respond to DevConfig, and for the current settings to be loaded into the

Settings Editor.

5.2 Deployment Tab

5.2.1 Communications

The Deployment Communications Editor is the active tab when you are first

connected (see FIGURE 5-2). These settings are used for RF communications.

26