MagTek QwickPAY - Manual (Page 34)

31 www.qwickpay.com
C. Managing my account in the Virtual Terminal
Sale Transaction
Connect the BulleT with the supplied USB cable to a USB port on the PC.
Go to https://myqwickpay.com and log into your QwickPAY virtual terminal account.
1. Select SALE from the menu.
Select SWIPE from the drop down menu.
2. Then turn on the BulleT. Once you have this connection, it will stay connected
with a solid green light until you either disconnect it from the PC or reboot the
PC. NOTE: The LED must be solid green on the BulleT in order for it to swipe
credit cards into the QwickPAY Virtual Terminal.
3. You will be asked to “Please swipe card”.
Swipe the customer’s card. the card data will automatically populate and the
card is authenticated.
4. Type in the amount you want to charge, including tax and/or tip. (You can set Tax
and Tip with Default values saved in Settings/Tax & Tip.)
If you want to email a copy of the receipt, make sure to click or tap on the
DETAILS button and enter in the email address.
5. Click/tap on the SUBMIT button once you are ready to process this transaction.
Once charged, you will see the approval or decline message.
Click/tap on View Receipt if you wish to view, print or email the receipt.
b. Card present sale using the BulleT via USB HID connection
5
C. Virtual terminal
BulleT
USB HID connection