MagTek QwickPAY - Manual (Page 18)

15 www.qwickpay.com
B. Managing my account for mobile devices.
b. Connect BulleT via Bluetooth
ii. For Newer Android devices
In newer versions of the Android OS customers may experience an issue when they are trying to discover and pair the BulleT
when scanning for available Bluetooth Devices in their Android Phone/Tablet. Previously they would find and pair very easily
because it would display and identify the BulleT as MAGTEK – A0123D4, but in newer Android OS’s it is displaying as a MAC
Address in this format of NC-2H-KM-7G-KW.
4
11
Here is a procedure to find the correct MAC Address and Pair the Android device with the BulleT
reader:
1. On your Android device pull up APPLICATIONS or MENU (depending on your Android device)
and select SETTINGS.
2. Select WIRELESS AND NETWORK.
3. Select BLUETOOTH SETTINGS.
4. Turn on the BulleT reader; a green light will flash when the device is trying to connect.
5. On your Android device select SCAN FOR DEVICES.
6. Start selecting found devices one by one.
7. The screen will prompt you for a PIN (the default is 1234).
8. Enter the PIN code and see which one locks the connection with the BulleT and displays a
solid green LED light.
9. Write down that MAC Address and save this Bluetooth name for future reference.
10. At this point the device is
PAIRED BUT NOT CONNECTED to QwickPAY.
11. Go to the QwickPAY Application on your device.
12. In the App, the top red bar shows the device is not connected.
13. Press the ‘Android MENU’ button on your Android device and choose CONNECT.
14. Connect to the desired MAGTEK BLUETOOTH device.
15. The top green bar shows the device is now connected.
16. The device is now ready to use.