Acer ALTOS 1100E - Manual (Page 99)

Chapter 3 - BIOS Utility 3-23
The following screen shows page 2 of the Onboard Devices Configuration menu:
Onboard Devices Configuration Page 2/2
Onboard Floppy Disk Controller ...... [Enabled]
Onboard IDE Primary Channel ......... [Enabled]
Onboard IDE Secondary Channel ....... [Disabled]
Onboard PS/2 Mouse (IRQ 12) ......... [Enabled]
Onboard USB ......................... [Disabled]
USB Legacy Mode .................. [--------]
Onboard Ethernet Chip ............... [Enabled]
SMBUS Interrupt(IRQ9) ............... [Disabled]
↑↓
= Move Highlight Bar,
→ ←
= Change Setting, F1 = Help
PgDn/PgUp = Move Screen
Serial Port 1
This parameter allows you to enable or disable the serial port 1. The Base Address
and IRQ items are configurable only if this parameter is enabled. The default
setting is Enabled.